The following processes of linter's hanger production:

1. The wood shall be dried naturally (due to different climates, it is recommended to relatively stable wood, such as beech, rubber wood, Fraxinus mandshurica, etc., it will crack.)

2. Customize the mold, open the material, splice the coat hanger, make the appearance of the gong machine, polish polish it, paint for many times, wait for the paint to dry out, finally pack it.

3. The wooden hanger has been basically formed after the production of hanger through the procedures of material opening, grinding ash mending. At this time, we need to paint the hanger with different technologies. Finally, we need to paint the hanger with colored paint varnish the effect of the hanger comes out. This is the two bottom one side.

4. The multi bottom multi surface painting treatment for hanger is to apply primer for many times, which is used for the production of hanger with special technology. As a step of coat hanger painting, primer is mainly to improve the adhesion, alkali resistance, corrosion resistance other functions of the top coat, also to ensure the absorption of the top coat.

After the above four steps, the hanger will come out, which is the production process of the hanger manufacturer.